accessdenied79

Members
  • Content count

    596
  • Joined

  • Last visited

  • Days Won

    7

Everything posted by accessdenied79

  1. I did. I meant I had to print out my map three times this weekend troubleshooting issues with two new zwave devices. Sent from my iPhone using Tapatalk
  2. Look at the text portion of your map when you open it. You have a graphical part (map itself) and the text from which the map is drawn. You will have a list of ids and the number on the map. Takes a little bit of work to pair them all up but I have done it three times this weekend alone, lol. Sent from my iPhone using Tapatalk
  3. Not sure if you can on hose controllers, never tried. Sent from my iPhone using Tapatalk
  4. Sent from my iPhone using Tapatalk
  5. Mine do also. Never really messed with that, that might be for the sprinkler controller, not sure. I just left them all zone 1 since they were hose controllers. Sent from my iPhone using Tapatalk
  6. Don't click the circle, that is to enable it. Click the word or the arrow on the right. Sent from my iPhone using Tapatalk
  7. Click in the middle where it says "weekly" or whatever you want to schedule. Sent from my iPhone using Tapatalk
  8. Right above where you pulled the map from you should see a link that says "To view your protocol ID's click here" Sent from my iPhone using Tapatalk
  9. You have to click the little schedule icon below the device. You can see it in the images you posted, bottom middle. Sent from my iPhone using Tapatalk
  10. Is anyone else's iris not working? My app won't launch and Alexa says device offline, etc. Sent from my iPhone using Tapatalk
  11. My friend text me asking if mine was acting up was the only reason I checked mine. The light was still green on the hub so who knows. Sent from my iPhone using Tapatalk
  12. Working again. 🤦‍♂️[emoji848] Sent from my iPhone using Tapatalk
  13. I have two new switches that I installed and they will not report their status until several minutes later if at all. I have three V2 smart plugs in the room outside the door (bathroom switches) and the zwave switch inside the bedroom works fine. If I take the hub in there as I did when I paired them, it shows up immediately when I turn them off/on. Anyone pair up a new zwave switch since the update? I can control them instantly with the app, just manually turned on they don't say they are turned on. Sent from my iPhone using Tapatalk
  14. I did a post a while back from issues I was having with gen 2 smart plugs repeating. Apparently it is very important that you pair these within 10 feet of the hub and let them sit 5+ minutes to stabilize the networks before moving them to their permanent home. If not, the zigbee will work but the zwave radio pairing will fail and they won't repeat z-wave. I had to remove, reset, and re-pair all of mine when iris support said two of them weren't repeating zwave but they couldn't tell me which ones. Sent from my iPhone using Tapatalk
  15. Yeah I already reported it on the official forum under the bug section and they said they are aware of it and are working on a fix. What I did was just left both active and went to the website and changed it to inactive. Sent from my iPhone using Tapatalk
  16. For those who didn't get this: Iris Customer, We are currently performing general platform maintenance that will last until 12am CST. Please use your Iris system as you normally would during this time. Thank you for being an Iris customer. Sincerely, The Iris Team Sent from my iPhone using Tapatalk
  17. I see they still haven't fixed this in the newest app update. I had all my favorites set the way I wanted them (order) and today it just decided to put them in the order it wanted them, again! No one else ever see this? Sent from my iPhone using Tapatalk
  18. When swapping between my paid account and my free account (rental house) in the Iris app, my favorites keep getting messed up when switching over to the paid account again. I have, in the past few weeks, have had to rebuild the order four times.
  19. New Incident Status: Resolved Amazon Web Service's outage has been resolved and Alexa voice control should be working as expected. Apr 11, 00:27 EDT Sent from my iPhone using Tapatalk
  20. If you are having issues with Alexa, amazon is having issues. AWS Alexa Outage Incident Report for SmartThings New Incident Status: Identified Amazon Web Services is currently experiencing an outage that may impact your Alexa voice control. Amazon is actively working on a resolution. Apr 10, 21:43 EDT Sent from my iPhone using Tapatalk
  21. Mine keeps saying "that command isn't supported on that device" when I tell it to turn a switch on. Sent from my iPhone using Tapatalk
  22. With the contact open. I believe doing it closed contact causes the light show, happened that way with mine, correct me if I'm wrong. Sent from my iPhone using Tapatalk
  23. Confirmed it works. Had to change to a different system and back to my house, my favorites didn't show on the first launch. Sent from my iPhone using Tapatalk
  24. Had the exact same thing happen last night, it showed the door was unlocked when it wasn't. I just pulled the batteries, waited 10 seconds, plugged it back in, and cycled the lock open and closed manually and the status was correct again. For how long, we shall see. Sent from my iPhone using Tapatalk
  25. When you are brought up around fire, police, and EMS there is no other time but 24 hour. You either learned it or didn't know what time it was. [emoji23] Wife doesn't like it though. Haha. Sent from my iPhone using Tapatalk