accessdenied79

Members
  • Content count

    738
  • Joined

  • Last visited

  • Days Won

    10

Everything posted by accessdenied79

  1. accessdenied79

    Connected Bulb Experience

    They initially had issues with old firmware, turning on by themselves, disconnecting, etc. When they did the latest update on the bulb firmware (had to get a lightify hub for this) they have all been perfect since then, this was a long time ago. Firmware is:1020492
  2. accessdenied79

    New iOS app 2.9.3

    Don’t see a change log yet, just wanted y’all to know it was out there. Edit: 2.9.4 actually.
  3. accessdenied79

    New iOS app 2.9.3

    Lol dang it! I was typing it at work and someone walked in and was asking a question, that’s what I get I guess. I tried correcting it and it won’t let me.
  4. accessdenied79

    V2 plugs and Z-Wave

    There are some post I did about the V2 plugs but basically what you have to do is unpair them, press the power button on them as you are plugging them in and let go when the blue light comes on. Make sure they are no more than 10 feet from the hub and re-pair them to the hub and let them sit 10 minutes to settle in. Move them where you want them after this time and they should repeat Z-Wave just fine. They said if you pair them away, they will pair zigbee but won’t repeat. I had to do all the ones at my dads when he was having issues with stuff repeating, support said I had to do the steps above on every V2 plug.
  5. accessdenied79

    New iOS app 2.9.2

    Yes, that was a much needed fix also!
  6. accessdenied79

    New iOS app 2.9.2

    New app hit the AppStore. Sent from my iPhone using Tapatalk
  7. accessdenied79

    GE In-wall Switches Dropped Off Network All At Once

    They eventually connected back up over the course of the evening. Thanks though, these were the switch ones that have the peg coming out so there wasn’t a “kill” switch on it so I tried the breaker and let it sit for a while. Seems to be good now, thanks though. [emoji41][emoji106]
  8. accessdenied79

    GE In-wall Switches Dropped Off Network All At Once

    Mine just did this tonight. A lot zwave devices that are GE went offline tonight, even the outdoor one. Going to try resetting them, they work manually.
  9. accessdenied79

    Contact sensors falling off

    Anyone else having contact sensors go in the weeds? I have had three crap out this week, two I have had to re-pair and one just a battery pull fixed it. My keypad is sucking batteries all of a sudden also. I would send an attachment but it says max size 0.02MB.
  10. accessdenied79

    Contact sensors falling off

    Another contact dropped off tonight and it may be, at most, two months old 🤦‍♂️. Haven’t checked it yet so not sure why, but add another one to the list. The keypad I just left dead, can’t afford batteries for that thing every two weeks. Update: just checked it, not a bad battery but I had to remove the battery and put the hub in pairing mode to get it to quit blinking blue after pulling the battery. It didn’t find it as a new device, just acted like it re-associated to the hub. Also the rules associated with it aren’t working so I guess this will be another removal and re-pair on ANOTHER contact sensor.
  11. accessdenied79

    Notifications Not Working

    I have had this system since the beginning of V1 and notifications have been usually solid except the startup of V2. Something was just glitchy that day for several hours and it went away. It has been working perfect ever since, if not too perfect. (Back yard camera notifications drove me crazy this weekend from yard work and I didn’t feel like turning them off) lol. Joe, if you are having that many issues maybe something needs to be checked on your system/internet connection?
  12. accessdenied79

    Batteries Depleting Rapidly

    Duracell. These last “low” ones I am going to let go until they are completely dead since that glass break has been at 1% for two months.
  13. accessdenied79

    Batteries Depleting Rapidly

    I would write it off to that if it weren’t some devices that I replaced the batteries less than two weeks ago, are “dying” again. On the same note, I had a glass break say low also and it has been sitting at 1% for over two months now. Maybe something is off with the algorithm for battery levels. 🤷‍♂️
  14. accessdenied79

    Batteries Depleting Rapidly

    And another one today 🤦‍♂️ Your Back Door's battery level at Home is low. Change your batteries as soon as possible.
  15. accessdenied79

    New iOS app 2.9.2

    Yes, one thing I noticed they fixed was the live view of a camera that was recording. It would just sit there and try to load but never do anything, seems they fixed that. I saw a list on the official site I believe of the changes, there were a few more.
  16. accessdenied79

    Notifications Not Working

    Of course, now they are working after I posted it. Maybe the new app fixed it, who knows.
  17. accessdenied79

    Tapatalk

    Best news so far today!!! Thanks Otto! I deleted the app awhile back thinking it wouldn't work again, reinstalling, lol.
  18. Back before the last two iOS releases of the app (hasn't worked the last two versions), I would get a notification that a camera has detected motion and it will start recording. I could open the app and press on the camera that is recording and see a live feed of that camera and even skip back on the live video to see what triggered the camera to record even before it was finished recording and converted into a "clip". Now when I press on the camera thumbnail all it does is put a spinning wheel in the middle of the screen and nothing ever loads, also the camera thubnail previews will refresh over and over, but actually they just look like they are flickering. I haven't been able to use this feature anymore (I believe 2.9 and 2.9.1, whatever the current release is and the one before). Also put this on the Iris Community under bugs. This is happening on the Outdoor V1 camera, haven't tested it on the others yet.
  19. accessdenied79

    Contact sensors falling off

    The battery is reading 2.9 volts. I pulled the battery and it didn’t fix it. I put a battery in that read 3.0 volts and it lit back up. No way 0.1 made a difference, but it is back online now. They are all on the back of the house except the mailbox, interesting for sure. Guess I will wait to see which one is going next.
  20. accessdenied79

    Contact sensors falling off

    Looks like the issues still continue, just got a notification that my garage upper deck door was offline, zigbee V2 contact sensor. I did the zigbee mesh reset power trick about two days ago.
  21. accessdenied79

    Contact sensors falling off

    I will do the rebuild here in a few. The last time I posted about them being offline was the last time they were. It was acting like the hub just forgot its pairing info, when I removed the battery the contact sensor acted like it wasn’t paired before. All has been good since last Sunday when I fixed the one in my mailbox.
  22. accessdenied79

    Contact sensors falling off

    Posted it here, so we will see what they say. https://community.irisbylowes.com/t5/Bug-Reports/Contact-Sensors-and-other-devices-dropping-out-of-system/m-p/4656#M590
  23. accessdenied79

    Contact sensors falling off

    I had two more contact sensors drop off this weekend, both of them I had to force remove and re-pair them. This is getting old, quick, makes me wonder what is going out next. Z-Wave has been fine, all mine has been battery operated zigbee devices, and the batteries are fine with the exception of the keypad chewing two sets of batteries.
  24. accessdenied79

    Contact sensors falling off

    At least I know that I am not going crazy then. I haven’t had that many devices drop (yet) but I just went through two sets of batteries on my V2 keypad.
  25. accessdenied79

    Outdoor camera disconnected

    My cameras wireless range has gotten crappy over the last two weeks. I checked for channel interference and all that and it is fine. I have a wireless garage door controller in the same spot and it shows 95% signal and the camera shows 45-50% in the same spot. Well the camera is in line of sight through a window and the garage door controller is through three walls. Not sure why the cameras signal is so low.