clarkabrank

Members
  • Content count

    5
  • Joined

  • Last visited

  1. clarkabrank

    Hacking the 2.0 Hub.

    Is There Any Way You Can Pull Off The JW999 And Take A photo? I would like to see if there is a way to read this chip on board without removing it. I also found something interesting from QMotion. Their new Qzhub is a jilia hub and their user guide provides the following information: Follow these instructions to update the firmware. 1. Download the firmware and copy it to a USB flash drive formatted to FAT32 (recommended 4 GB size). 2. Create a folder named “jiliaupdate” in the root drive of the USB. 3. Place the downloaded firmware in the jiliaupdate folder (will be a .bin file). 4. Power off the hub and insert the USB drive into one of the USB ports. 5.Power up the hub and allow 10 minutes for the hub to update the firmware. 6. Remove USB device. QMotionQzHub-User_Guide-Updated.pdf
  2. clarkabrank

    Hacking the 2.0 Hub.

    Is There Any Way You Can Pull Off The JW999 And Take A photo? I would like to see if there is a way to read this chip on board without removing it.