Chon_Lee 31 Report post Posted October 2, 2017 My wife picked up a few indoor cameras for her parents house on eBay but we did not realize when she purchased them that they were the Sercomm RC8221D unit rather than the RC8221 units. These cameras have the Sercomm factory firmware with the web interface on them and I cannot get the Iris hub to detect them. I did the factory reset with the hub unplugged and I've even changed the admin username to alertme and set the password to nFQTEm*s67uxuF**a2vAth7RoJ but this did not seem to fix the detection on the hub either. Anybody have any experiences with these D units or have any suggestions I could try to get them adopted by the hub? Share this post Link to post Share on other sites
ShieldOfSalvation 0 Report post Posted February 3 On 10/2/2017 at 4:42 PM, Chon_Lee said: My wife picked up a few indoor cameras for her parents house on eBay but we did not realize when she purchased them that they were the Sercomm RC8221D unit rather than the RC8221 units. These cameras have the Sercomm factory firmware with the web interface on them and I cannot get the Iris hub to detect them. I did the factory reset with the hub unplugged and I've even changed the admin username to alertme and set the password to nFQTEm*s67uxuF**a2vAth7RoJ but this did not seem to fix the detection on the hub either. Anybody have any experiences with these D units or have any suggestions I could try to get them adopted by the hub? I'm in the same boat. Any ideas? Share this post Link to post Share on other sites
Chon_Lee 31 Report post Posted February 3 1 hour ago, ShieldOfSalvation said: I'm in the same boat. Any ideas? No, I gave up on these with Iris. Share this post Link to post Share on other sites
thegillion 336 Report post Posted February 3 @ShieldOfSalvation With the shutdown of Iris I would use a service like BlueIris (You need your own server.) but they should work no problem. Share this post Link to post Share on other sites
Vettester 702 Report post Posted February 3 24 minutes ago, thegillion said: @ShieldOfSalvation With the shutdown of Iris I would use a service like BlueIris (You need your own server.) but they should work no problem. Blue Iris is not a service, it is a standalone application which I highly recommend. This site has a wealth of information related to the Blue Iris application: https://ipcamtalk.com/forums/blue-iris.30/ Share this post Link to post Share on other sites
